QIDI X-MAX 3 Toolhead

Due to the heat issues that could affect the QIDI 3 Series tool head some clogs were redesigned to improve airflow and to reduce the hotend and tool head electronics temperature.

This mod was created for QIDI X-MAX 3, as 3 models are similar and should fit all or some parts, please check before print. 

This is a 3 (or 4 depending on mod) part mod:

Extra material needed:

• You can use the stock screws to mount the mod
• 5015 standard fan, we used Sunon Maglev to improve airflow and reduce the noise… if you choose the standard fan version
• x8 - 6x1.5mm magnetic neodymium… if you choose the magnetic version

Print in ABS/ASA or similar filament with good temperature support, 4 walls, 4 top/bottom, 20% infill gyroid and tree supports only in bed needed.

Changelog: