Rafa Nadal Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm

 The Model is 150x149.37mm in size

 You may print at higher layer heights below the Min Depth of 0.5mm

 The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:

PLA PolyTerra Charcoal Black Transmission Distance: 0.3

PLA smatfil White Transmission Distance: 6

This print uses 2 unique filaments

Swap Instructions:

Start with Charcoal Black

At layer #7 (0.58mm) swap to White for the rest.