0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-04-12 09:44:49
2.9k
123
Report

Rear cable management system for Kobra S1 Max D3P riser

@Darren3dprint_3680478
Message
Follow
Description

MODEL


This model is a modular cable management system for use with the Kobra S1 Max D3P riser - Link: 🧞‍♂️ Anycubic Kobra S1 Max D3P riser・ 3MF File for 3D printing・Cults


The cable management consists of the following components:


  • A modular top bar;
  • Long or short modular bottom bars;
  • Cable clips for PTFE, RS485 and electrical - various sets are provided for both vertical and horizontal use (click on the parts or STL to see their intented use);


The cable management system allows you to configure and organise the rear of your D3P riser as you want.


INSTALLATION


Installation is quick and simple (see photos).

  1. Slice and clip in the vertical U-Clips on the supports at the rear of the top cabinet drawers;
  2. Slide in the top bar to lock the assembly;
  3. Three types of bottom bars are provided, a large one for the left and right side (the right side is notched to account for the LED cable) and a short bar for use on either side.
  4. Print the cable holders you want and simply slide them in the dovetail bars to secure them in place.






3D PRINTING


PRINT SETTINGS


IMPORTANT I upload a print setting files for all my models. The print settings has the parts positioned for correct printing with support painted.


I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.


3D PRINT SETTINGS

I use the following settings and materials to print this model:

Infill % : 15% (no need for more)

Nozzle diameter: 0.4 mm

Layer height: 0.2 mm standard

Walls: The model is set for 2 walls. Some users have reported better rigidity with 3 walls.

Material: The Anycubic Kobra S1 Max has an internal heater. PETG is the preferred choice for filament as it is about the same price as PLA but will sustain higher temps without deforming. You can also print the riser using ASA or ABS but this is more challenging due to possibility of warping. If you will only be printing PLA or PETG and will not place a dryer on the riser then you can print in PLA. This suggestion applies to the entire riser and not only the base parts. 


ABOUT ME

 

I enjoy creating 3d models that others can use and appreciate. It is a very fun pastime. I find it very rewarding to see my models downloaded and printed. I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right.


If you liked my model and wish to encourage me please give it a like. If you wish you can also help me with my filament costs. You can also use the discount codes listed below. You will save and I get a small commission for certain purchases. Thank you.


DISCOUNT AND AFFILIATE CODES FOR PRINTER AND FILAMENT


I am continuously trying to get discount codes from various manufacturers. Unlike many affiliate links these give discounts on purchases and are more difficult to obtain. In my requests I ask that they give me the codes with the most discounts for users even if it means a smaller commission.


DISCOUNT CODE LINK: Click here to see the discount codes

 

HOW TO USE THE CODES


1.      You need to CLICK ON THE LINKS. The links are usually set up by countries/regions.

2.      Add the items you want to purchase

3.      Enter the DISCOUNT CODE at checkout. The codes vary by month and saving – so check back each month for the latest offers.

4.      You can only use ONE CODE so be certain to enter the one with the most discount 

Tags
Cable management
S1 Max
D3P
D3P riser
S1 Max riser
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.