0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2024-05-16 23:00:09
1.8k
136
Report

Redesigned Yoda bookend

@sand_1560112
Message
Follow
Description

This is a redesign of @Bignozz's awesome Baby Yoda themed book stand. I redesigned the stand so that the books (or in my case the Blu-rays / Xbox games / DVDs) transfer the weight to the stand itself, so it no longer slides away.

I also adjusted the size and made it a bit smaller than the original. But it can easily scaled up in the slicer if needed. The p itself has now no more connection to the stand, so the distance to the stand can be adjusted.

Print settings:

For the Baby Yoda:

  • Print it standing
  • Supports enabled (I used the organic supports from Prusa Slicer 2.6-alpha6, you have to make sure that on the right hand for all fingers the supports are selected )
  • Layer height: 0.15mm

For the stand:

  • Print it on the side, this will make it stronger when it comes to holding the books
  • Layer height: > 0.2mm (I used 0.55mm with a 0.8mm nozzle)
  • Infill: 100%
Tags
starwars
lowpoly
bookend
books
bookstand
License
This remix is based on