Reolink E1 Wall / Shelf Mount (E1Pro / E1 Zoom)

Wall Mount / Shelf Mount for Reolink E1, E1 Pro & E1 Zoom

"Secure. Fits. Films. – More View, Less Cable Clutter."

Sometimes you don't need a high-tech mount from a space program – just something that is securely seated, flexibly mountable, and doesn't let the cable dangle like spaghetti. That's exactly what this holder is designed for

Originally developed for a "rabbit hutch with free run" (Priorities!), it's now also used by users for printer monitoring and other setups 😁

Features

• Compatible with Reolink E1 / E1 Pro / E1 Zoom
• Horizontal or vertical mounting possible (depending on the installation location)
• 2 mounting positions for the original Reolink adapter plate (depending on orientation)
• Cable clip on the back: Power cable stays where it should
• Solid, simple, practical – no frills, just functionality

Hardware

• Holder Fastening: Standard screws up to Ø 4 mm
• Camera/Adapter Plate: M3x8mm to M3x12mm countersunk screws
• (depending on material/screw head, check briefly beforehand to ensure nothing interferes internally)

No adapter plate anymore?

User Jogi164 has created a suitable adapter plate – thanks for that! 🙌

Perfect for moments like…

• …you want to see who's "redecorating" in the rabbit hutch again 🐰
• …you want to keep an eye on the printer without running into the room every 3 minutes
• …you need a camera on a shelf, but want to keep drilling to a minimum
• …you want to place the E1 effectively without the cable playing the main role

A Little Note

The model is a 3D-Print-Mount (not an official Reolink accessory). Please briefly test if everything is securely seated when used in sensitive locations – before the camera involuntarily turns into an 'action cam' 😁

Happy Printing!

If this part helps you, a Like / Comment / Make would make me incredibly happy – it also helps others with their evaluation 😉

 Print Recommendation

• 0.2 mm Layer Height
• 4 walls (maximum stability)
• Seam Position: Rear
• Wall Generator: Arachne
• 15% Infill: Gyroid
• Support: minimal (manual) only below the mount, only on build plate
• Material: PLA for indoor (completely sufficient), PETG or better recommended for outdoor (more robust/temperature resistant than PLA)