0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-06-05 16:22:51
241
6
Report

Reptil Eye

@D3dprints_465940
Message
Follow
Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 143.47x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 3.1mm and the Actual Depth is 2.6mm

Filaments Used:

    PLA Jayo Black Transmission Distance: 0.6

    PLA Kingroon Grey Transmission Distance: 2

    PLA Kingroon Green Transmission Distance: 1.8

    PLA Smartmaterials White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

    Start with Black

    At layer #9 (0.8mm) swap to Gray

    At layer #11 (0.96mm) swap to Green

    At layer #13 (1.12mm) swap to White for the rest.

Tags
deco
art
reptil
wall
License