Ryobi ONE+ 18V Wall Mount – Modular 2-Part System

A modular wall mount system for Ryobi ONE+ 18V tools, designed and tested to fit the following tools:

• Drill/driver
• Reciprocating saw
• Belt sander
• Impact

The system uses two parts:

• Tool holder: Interfaces with the Ryobi ONE+ battery slot to hold the tool securely. Fastened to the wall bracket using 3× 3.5×10mm coarse thread screws.
• Wall bracket: Mounts directly to the wall with screws.

Note: Fitment is verified only for the tools listed above. Other Ryobi ONE+ 18V tools may or may not fit. If your tool requires a different holder geometry, a custom bracket can be designed to work with the same tool holder.

For the reciprocating saw, only the tool holder is needed – no wall bracket required.

Print settings:

• Material: PETG recommended (PLA+ works indoors)
• Infill: 15%+
• Supports: Not required
• Layer height: 0.2mm

Hardware required:

• 3× coarse thread screws, 3.5×10mm (per tool holder)
• 3× screws for wall bracket