2026-02-23 04:55:30
9.9k
768
S1 Max riser
@Jimfish98_4773304
Donate
Message
Follow
Recommended printing method
Add
Whole Riser
Kobra S1 Max
Kobra 3
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
/ Plates:4
/ 33h1m
V2 of the riser
Kobra S1 Max
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:5
/ 33h30m
177
Share
Description
Riser for the new S1 Max to place the Ace unit on top of the printer and retain access to the glass lid on the printer. I printed this with PLA 2.0+ but PTEG or similar may be better as once weight is applied it pushed very slightly on the sides. Cross bars are a tight fit to the end pieces, make sure to leave a slight gap in their connection and not be perfectly flush or you will risk it being too narrow for the glass. I did not include print files for screws for securing things, you can find those prints online or use actual screws. The cross bars can be locked in with M5*20mm and the side bins with M5*8mm. Cross bars have holes for two screws, one I believe is efficient but added a second just in case.
Tags
License
