Description
S1C铲刀,使用“金利士2号刮脚刀片”,拼多多4元10片,比拓竹刀片便宜很多,一把铲刀总成本不到2元人民币。
打印完成可以挂在门把手上,随用随取,如果遇到装不上的情况可以把门把手调转方向重新安装。非中国用户可参照图片寻找合适刀刃
The S1C shovel uses the "Jinlisi No.2 Foot Scraper Blade", which costs 4 yuan and 10 pieces on Pinduoduo, much cheaper than the bambu lab. The total cost of a shovel is less than 2 yuan.
After printing, it can be hung on the door handle for easy access. If it cannot be installed, the door handle can be turned and reinstalled. Non Chinese users can refer to the image to find a suitable blade
![]()
打印完成后,需要使用m2X3X4的热熔螺母配合m2x4螺丝/或m2螺母配合m2x8螺丝固定刀片
After printing, it is necessary to use m2X3X4 hot melt nuts with m2x4 screws/or m2 nuts with m2x8 screws to fix the blades
![]()
![]()
![]()
Tags
License

