Description
去山姆看到有上中动钢铁侠拆甲台套装,但是家里已经有了中动的MK3了,所以根据其原型作为参考设计了这款可以用FDM拆甲台。
最大的零件底座最宽为18cm,所以A1mini也能打印。
零件需要使用胶水进行粘合组装,有银灰色转轴处的表示该处关节可动,且该处关节采用类棘轮连接,可多角度悬停。
具体组装步骤如下:
一、底座:
需要使用胶水固定

二、侧边机械臂×2:
1、底部圆座使用胶水固定

2、大臂使用胶水固定(外板刻线对称)

3、小臂使用胶水固定(外板刻线对称)

4、套筒机械手使用胶水固定

5、套筒支架使用胶水固定

6、整体组装、使用最短转轴,最短转轴与外板用胶水固定


二:立体机械臂:
1、底部滑轴使用胶水固定

2、大臂使用胶水固定(外板刻线对称)

3、小臂使用胶水固定(外板刻线对称)

4、立体抓夹,使用最长转轴,最短转轴与外板用胶水固定

5、整体组装、使用最短转轴,最短转轴与外板用胶水固定


三、最后的整体组装,后方的立体机械臂需用胶水与底座固定,两侧机械臂可以勿用胶水(因为可以转动),有条件可以使用直径10mm、厚度1mm磁铁加钱固定


Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.

