Sailor Moon Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 100x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Smart Recycled Dark Blue Transmission Distance: 0.5
PLA Smart Recycled White Transmission Distance: 5.7
PLA Smart Recycled Silver/Gray Transmission Distance: 0.5
PLA Smart Recycled Red Transmission Distance: 4.4
PLA Smart Recycled Orange Transmission Distance: 5.7
PLA Smart Recycled Yellow Transmission Distance: 9.3
This print uses 6 unique filaments
Swap Instructions:
Start with Dark Blue
At layer #11 (0.96mm) swap to White
At layer #12 (1.04mm) swap to Silver/Gray
At layer #13 (1.12mm) swap to Red
At layer #14 (1.2mm) swap to Orange
At layer #16 (1.36mm) swap to Yellow
At layer #17 (1.44mm) swap to White for the rest.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
