Saint Valentine's Bookmark

Lovely bookmark with Saint Valentine's quote.

Give it at your special person!

You can find the image at: https://creazilla.com/it/media/silhouette/2123/bacio

Autor: Natasha Sinegina

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50x178.35mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 1.8mm and the Actual Depth is 1.8mm

Filaments Used:

    PLA BambuLab Basic Pink Transmission Distance: 8

    PLA BambuLab Matte Ivory White Transmission Distance: 4

This print uses 2 unique filaments

Swap Instructions:

    Start with Pink

    At layer #11 (0.96mm) swap to Ivory White for the rest.