0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-07-23 21:58:56
1.6k
210
Report

Shelf Pins

@Ingeimaks_1950724
Message
Follow
Description

I created some Shelf Pins (shelf supports) using my 3D printer. I needed a support for a bathroom shelf and, instead of buying it, I decided to design and print it myself. The material I used is quite sturdy, but it’s crucial to print the piece in the correct orientation to ensure maximum durability.

Printing advice:

  • Orientation: It’s important to print the support horizontally (with the long side parallel to the print bed). If you print it vertically, the forces applied to the shelf could cause the piece to break along the layers, as the strength between layers is lower than the strength along the same layer.
  • Material: Use a durable material like PLA+, PETG, or ABS, depending on your needs and the required strength.
  • Infill: Set the infill to at least 20-30% to ensure good strength.

If you’d like, I can share the STL file or provide additional printing tips! 😊

Tags
shelf pins
3d printed pins
furniture accessory
adjustable shelf
DIY shelving
shelf support
cabinet hardware
woodworking part
custom shelf pins
peg shelf system
printable shelf part
storage solution
maker accessory
furniture fixing
home improvement
License