0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-01-01 04:27:20
1.5k
76
Report

Shipping Container Terrain Print-In-Place

@miniforall_3761697
Message
Follow
Recommended printing method
Description

Shipping container terrain written in cadquery.

The container is printed in one piece with two working hinges and doors.

I made two different variants one with greebles and the other plain.

 

---

 

For more details and part specs go here:

https://miniforall.com/shippingcontainer

 

This is an open source project that you can customize:

https://github.com/medicationforall/cqportal

 

You can support this project and other projects I'm working on at patreon:

https://www.patreon.com/medicationforall

 

---

 

### Greebled Container

* Length - 150mm

* Width - 75mm

* Height - 75mm

* Weight - 117grams

* Print Time - 16 hours 50 minutes

* Layer Height - 0.2mm

* Infill - 10%

* No Supports

* to fit the model on 200x200mm print bed, I printed the model with the doors up.

* I print with a brim of about 3 lines because the closed door contact is very small on the base


### Plain Container

* Length - 150mm

* Width - 75mm

* Height - 75mm

* Weight - 115grams

* Print Time - 15 hours 18 minutes

* Layer Height - 0.2mm

* Infill - 10%

* No Supports

* To fit the model on 200x200mm print bed, I printed the model with the doors up.

* I print with a brim of about 3 lines because the closed door contact is very small on the base

Tags
cadquery
parametric
warhammer 40k
deadzone
star wars legion
kill team
stargrave
necromunda
terrain
wargaming
28mm
printinplace
corvus belli
License