Simple Fish Keychain

A minimalist, stylized fish keychain. It features smooth chamfered edges for a comfortable feel in your pocket and a pre-designed hole that perfectly fits standard keyrings or carabiners. It is a very quick and easy print, making it a perfect project to use up those last few meters of filament on your spool!

The back of the fish is completely free and can be used to put text on if you wish to.

Dimensions: 51.6 mm x 22.7 mm

Print Settings & Recommendations

• Orientation: Print flat on its side.
• Supports: None required.
• Layer Height: 0.10 mm – 0.20 mm works great.
• Infill: 15% - 20% (Gyroid or Grid is fine).
• Walls / Perimeters: 2 or 3 walls are plenty for a sturdy keychain.
• Material: PLA or PETG both work perfectly.
• Tip: If you have a textured PEI build plate, it gives the flat side of the fish a really nice premium finish!

Images are enhanced with Gemini AI