Sketch Dream Car

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

Filaments Used:

PLA PolyTerra Charcoal Black Transmission Distance: 0.3

PLA Chrominal Penumbra Gray Transmission Distance: 8

PLA PolyLite Pro Grey Transmission Distance: 0.5

PLA Overture White Transmission Distance: 4.4

This print uses 4 unique filaments

Swap Instructions:

Start with Charcoal Black

At layer #4 (0.4mm) swap to Penumbra Gray

At layer #9 (0.8mm) swap to Grey

At layer #11 (0.96mm) swap to White for the rest.