2024-12-07 06:57:52
413
39
Skull Catrin - Wall Art
@Thrpedito_4847336
Donate
Message
Follow
Recommended printing method
Add
0.08mm layer, 1 walls, 100% infill
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Pro
、
Kobra 2 Max
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 1h04m
12
Share
Description
Project: Skull Catrín.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 100x100mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #9 (0.8mm) swap to Grey
At layer #21 (1.76mm) swap to White for the rest.
Tags
License
Comments & Ratings
Here is empty
Remixes
