2025-12-23 00:39:59
1.3k
91
Slide Soldering Clamp with Opt. Printed Spring
@JeffSmith_672836
Donate
Message
Follow
Recommended printing method
Add
Slide Soldering Clamp w/Opt. Printed Spring
Kobra 3 V2
Kobra 3
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 Max
/ Plates:1
/ 3h0m
23
Share
Description
*** Updated Version here
Clamp to hold various wire sizes allowing the leads to be more easily soldered together. Print this out of PETG, Easy ABS, or something a little more heat resistant than PLA. Having said that, it was purposefully made easy to print as those who do print from PLA or even PETG will likely destroy it after a while if they touch the clamps with the soldering iron.
I wanted something stiffer than print in place springs so I used 0.7 x 7 x 25mm compressions springs (can be found on Amazon).
Added a snap in printed spring. Easy, quick assembly.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
