Slow Glow, snail shaped lamp

Meet Slow Glow, a 3D-printed table lamp inspired by the gentle shape and natural spiral of a snail.

Its translucent shell diffuses the light into a soft, warm glow, while the detailed body gives the lamp a playful yet sculptural appearance. It works beautifully as a bedside lamp, desk light or decorative accent for a cozy corner of your home.

The body and shell are printed separately, allowing you to create your own color combinations and give each snail a different personality.

Main features

Original snail-shaped table lamp

Separate body and translucent shell

Customizable color combinations

Designed for an E14 lamp holder

Dedicated printed support for the lamp holder

Suitable for desks, bedside tables and ambient lighting

Simple final assembly

Assembly

Route the unplugged power cord through the lamp body and prepare the E14 lamp holder according to the manufacturer’s instructions.

Screw the E14 holder onto the dedicated printed support, then glue the support securely to the lamp body. Once the adhesive has fully cured, install the bulb and place the printed shell over the assembly.

Important safety information

Use only an E14 LED bulb with a maximum diameter of 38 mm, otherwise it will not fit inside the shell.

Always assemble and wire the lamp while it is unplugged. Follow your local electrical regulations and consult a qualified electrician if you are unsure about the electrical connections.

If you print Slow Glow, I would love to see your color combinations—share your make!

You can find compatible lampholders here (the links are for reference only; the important thing is that they have a threaded body and no locking ring).

amazon link , aliexpress link