2025-09-23 10:19:22
2.9k
393
Report
Report
Small First Layer Test – Kobra S1
Recommended printing method
Print Profile Files (3)
Raw Model Files (2)
- All Printers
- Kobra S1 Max
- Kobra 3
- Kobra 2
- Kobra S1
- Kobra 4
- Kobra X
- Kobra 3 V2
- Kobra 3 Max
- Kobra 2 Max
- Kobra 2 Pro
- Kobra 2 Neo
- Kobra 2 Plus
No data
Add
kobra S1
Report
Report
Fabio
Upload:2025-09-23 10:19
Size: 28.08KB
Kobra S1
Kobra S1 Max
、
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
PLA
:5.46g
0.4 mm nozzle
Plates(1)
Plates 1
0.2mm layer /
35m
PLA:5.46g
Designer
kobra S1
Kobra S1
Kobra S1 Max
、
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 35m
nozzle_0.6mm
Report
Report
Fabio
Upload:2025-09-23 11:01
Size: 28.15KB
Kobra S1
Kobra S1 Max
、
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
PLA
:8.02g
0.6 mm nozzle
Plates(1)
Plates 1
0.3mm layer /
37m
PLA:8.02g
Designer
nozzle_0.6mm
Kobra S1
Kobra S1 Max
、
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 37m
nozzle-08mm
Report
Report
Fabio
Upload:2025-09-23 12:01
Size: 28.14KB
Kobra S1
Kobra S1 Max
、
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
PLA
:10.91g
0.8 mm nozzle
Plates(1)
Plates 1
0.4mm layer /
39m
PLA:10.91g
Designer
nozzle-08mm
Kobra S1
Kobra S1 Max
、
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 39m
Select the Files to open
Tips
Anycubic Slicer Next failed to wake up
Download Print Profile Files
Tips
Coins reward
9
23
- New Collection
New Collection
Share
Facebook
Pinterest
Twitter
Reddit
- Copy link
Coins reward
Model Information
Comments & Ratings
Remixes
Related Models
Description
Description
🧼 Before running the first layer test, make sure to:
- Enable bed preheating to your desired printing temperature
- Clean the print bed with warm water and dish soap (avoid alcohol or harsh solvents)
- Run bed leveling (G29)
- Run flow calibration
Compact first layer test model designed to check bed leveling and improve adhesion.
📦 The download includes two separate print profiles:
- One for Anycubic Kobra S1
The model covers a useful portion of the bed and allows for quick and precise calibration.
It was tested using PLA on both printers with excellent results.
📂 Ready to print as-is – just select the correct profile.
🙏 Thank you for downloading! If you found it helpful, please leave a like, a comment, and share a photo of your print – I’d love to see it
Tags
firstlayer test
firstlayer
bedlevel
smalltest
kobra test
leveling
printcal
License
The model cannot be found
The model may not have been published or does not exist
