0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-07-31 07:43:49
539
13
Report

Spanish National Football Team Crest - FIFA World Champions 2026

@iyadmn_2602595
Message
Follow
Recommended printing method
Description

Spanish National Football Team Crest - FIFA World Champions 2026


For weeks now, I've had the Spanish National Team's crest designed in different formats: for Ace PRO/AMS, with a raised version, a flatter or lighter version with less waste, and a multi-part version.


All the trays are in the same 3MF file. Below, I explain what each tray contains:


  • First tray: Spanish National Team crest with gold relief and without the stars. The gold border covers the entire thickness of the crest. Print time: 7 hours 41 minutes.


  • Second tray: Spanish National Team crest with gold relief and with the stars. Translucent PLA is recommended for the star borders. The gold border covers the entire thickness of the crest. Print time: 6 hours 12 minutes.


  • Third tray: Crest with low-profile gold relief and with the stars. The gold border only covers the top layers. This can be done with AMS for two colors or by setting a pause for color change. It is the lightest version and prints in 3 hours.


  • Fourth and fifth trays (Multi-part): Crest base with different orientations, so each user can choose which to use. Tray 4 is for printing face up if you want to create a top-smooth finish and monochromatic lines, and tray 5 is for printing face down so that the first layer takes on the texture of the PEI tray. Each tray takes the same amount of time to print, about 2 hours and 30 minutes.


  • Sixth Tray: Gold embossed parts. These are printed upside down so they take on the texture of the PEI tray. I recommend using Gold Silk PLA; it looks nicer than yellow. Also, when removing the parts from the tray, be careful or do it gently to avoid losing the smaller pieces. It prints in 2 hours and 40 minutes.


  • Seventh Tray: Star borders for the multi-part shield. Translucent PLA is recommended for the star borders. It prints in 18 minutes.


The design is intended to be hung on the wall (it has a hole on the back for a flat hook) or displayed anywhere using a stand like the one from Geordie Juice.


I hope you like it. Don't forget to like, share photos of your impressions, or comment with any details.


Escudo de la Selección Española - Campeones Mundial FIFA 2026


Desde hace semanas tengo diseñado el escudo de la Selección Española en diferentes formatos: Para Ace PRO/AMS, con versión en relieve, con versión más plana o light sin tanto desperdicio y la versión multipartes.


En el mismo fichero 3MF están todas las bandejas. A continuación, explico que contiene cada bandeja:


  • Primera bandeja: Escudo de la Selección Española con relieves en dorado y sin las estrellas. El borde dorado abarca todo el grosor del escudo. Tiempo de impresión: 7h 41min.


  • Segunda bandeja: Escudo de la Selección Española con relieves en dorado y con las estrellas. Se recomienda usar PLA Translucent para los bordes de las estrellas. El borde dorado abarca todo el grosor del escudo. Tiempo de impresión: 6h 12min.


  • Tercera bandeja: Escudo con relieves en dorado de baja altura y con las estrellas. El borde dorado solo abarca las capas superiores. Se puede hacer con AMS para dos colores o configurando una pausa para cambio de color. Es la versión más liviana y se imprime en 3h.


  • Cuarta y quinta bandejas (Mutipartes): Base del escudo con diferentes orientaciones, para que cada uno elija cual usar. La bandeja 4 es para imprimir bocarriba si se quiere hacer con planchado superior y líneas monotónicas y la bandeja 5 es bocabajo para que la primera capa coja la textura de la bandeja PEI. Cada bandeja tarda lo mismo en imprimirse, unas 2h 30min.


  • Sexta Bandeja: Partes doradas con relieve. Se imprimen bocabajo para que cojan la textura de la Bandeja PEI. Recomiendo usar PLA Silk Dorado, queda más bonito que usar amarillo y también al despegar las partes de la bandeja tener cuidado o hacerlo con delicadeza para no perder las partes más pequeñas. Se imprime en 2h 40min.


  • Séptima bandeja: Borde de las estrellas para el escudo multipartes. Se recomienda usar PLA Translucent para los bordes de las estrellas. Se imprime en 18min.


El diseño está pensado para poder colgarlo en la pared (tiene un orificio posterior para una alcayata plana) o colocarlo en cualquier parte con un expositor como el de Geordie Juice


Espero que os guste. No os olvidéis de darle al like, compartir las fotos de vuestras impresiones o comentar cualquier detalle.

Tags
Spain
FIFA
Football
Soccer
Champions
World Cup
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.