2026-01-16 07:05:03
1.3k
54
Sparta 300
@OKOLOART_5563577
Donate
Message
Follow
Recommended printing method
Add
MY Print
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 8h17m
16
Share
Description
his model is an elegant decorative piece and works beautifully as a display item.
I printed it at the maximum size my printer can handle.
Print settings used:
- 0.14 mm layer height
- 3 perimeters/walls
- 7% infill
During printing, I experimented a bit with the speed, which caused a small imperfection on the staff. This is not an issue with the model itself. With proper print settings — and without playing around like I did — the statue should print cleanly and without defects.
Enjoy printing and displaying this piece!
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
