Spiderman - Brand New Days

LUDWINGCREATION

🎨 HUEFORGE INFO🎨

🎯 Ready-to-print 3MF included

All settings are already configured. Just slice and print.

🌈 FILAMENT COLORS USED

#000000 PLA Anycubic Black Transmission Distance: 0.1

#c8112e PLA Anycubic Red Transmission Distance: 7.2

#606783 PLA+ Esun Gray Transmission Distance: 2.8

#003594 PLA Anycubic Blue Transmission Distance: 2.6

#ffffff PLA Anycubic White Warm Transmission Distance: 6.2

#e0e721 PLA Anycubic Yellow Transmission Distance: 5.8

This print uses 6 unique filaments

🔄 COLOR SWAP LAYERS

Swap Instructions for 2 AMS

Start with Black

At layer #6 (0.56mm) swap to Red

At layer #14 (1.2mm) swap to Black

At layer #15 (1.28mm) swap to Gray

At layer #18 (1.52mm) swap to Blue

At layer #22 (1.84mm) swap to White Warm

At layer #25 (2.08mm) swap to Yellow

At layer #30 (2.48mm) swap to White Warm for the rest.

Swap Instructions for 1 AMS

Start with Black

At layer #6 (0.56mm) swap to Red

At layer #14 (1.2mm) swap to Black

At layer #15 (1.28mm) swap to Gray

At layer #18 (1.52mm) swap to Blue

Pause At layer #19 (1.6mm) Change Black with White And Red With Yellow

At layer #22 (1.84mm) swap to Black

At layer #25 (2.08mm) swap to Red

At layer #30 (2.48mm) swap to Black for the rest.

⚠️ IMPORTANT⚠️

• You can resize X/Y freely

• ❗ DO NOT change Z height

👉 If you scale the model, restore the original Z height

otherwise color transitions will be incorrect.