Square Super-Fidget (Print-In-Place)

I made this Square Super-Fidget as a print-in-place fidget toy with a cool and unique design that is fun to use. The part I like most is how it pops in color. I really recommend printing with engaging and bright colors so the print really stands out.

Print settings:

• Infill: 2%-15%
• Infill Type: Gyroid
• Supports: NO
• Brim: NO
• Filament: PLA or PETG or ABS/ASA
• Listed profile: 1 plate in 1 hour 25 minutes 46 seconds, with the first layer slowed down for better results

Tips:

• The catch is the first layer: if you are having problems, clean the print bed and check the first layer, because it is the most crucial layer in the print.
• The whole print is just perimeters.

My Patreon page is still available at patreon.com/MasterPrinter, but I do not actively update it anymore.

You may also like:

• Super Fidget Hexagon Twist https://www.makeronline.com/en/model/Super%20Fidget%20Hexagon%20Twist/156358.html
• Fidget Button (Doesn't Waste Filament) (Print-In Place) https://www.makeronline.com/en/model/Fidget%20Button%20(Doesn't%20Waste%20Filament)%20(Print-In%20Place)/68317.html
• Double Fidget Button Prototype (Print-In Place) https://www.makeronline.com/en/model/Double%20Fidget%20Button%20Prototype%20(Print-In%20Place)/68319.html
• Extremely Satisfying Fidget Clicker Wheel https://www.makeronline.com/en/model/Extremely%20Satisfying%20Fidget%20Clicker%20Wheel/68309.html
• The BEST Impossible Vortex Passthrough https://www.makeronline.com/en/model/The%20BEST%20Impossible%20Vortex%20Passthrough/68306.html