Static X Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 175x200mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.3mm and the Actual Depth is 2.4mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA+ Sunlu Grey Transmission Distance: 2

PLA+ Sunlu Silver Transmission Distance: 2

PLA+ Sunlu Blue Transmission Distance: 4

PLA+ Sunlu White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Grey

At layer #11 (0.96mm) swap to Silver

At layer #16 (1.36mm) swap to Blue

At layer #24 (2mm) swap to White for the rest.