0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-02-03 19:44:41
745
11
Report

Stranger Things - Chapter 1 - HueForge

@Rid3r_R_145327
Message
Follow
Recommended printing method
Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm



 The Model is 120.1x150mm in size


 You may print at higher layer heights below the Base Thickness of 0.48mm

 The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm



#000000 PLA+ Sunlu Black Transmission Distance: 0.6

#0f52ba PLA+ Sunlu Blue Grey Transmission Distance: 3

#d22332 PLA+ Sunlu Red Transmission Distance: 6

#ffd500 PLA+ Sunlu Pure Yellow Transmission Distance: 5

#ffffff PLA+ Sunlu White Transmission Distance: 5

This print uses 5 unique filaments



Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Blue Grey

At layer #10 (0.88mm) swap to Red

At layer #15 (1.28mm) swap to Pure Yellow

At layer #20 (1.68mm) swap to White for the rest.


Tags
strangerthings
upsidedown
will
lucas
dustin
mike
eleven
netflix
tv
pop
dark
License
Documentation
TXT
Chapter_1_describe.txt
804B