Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 120.13x150mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#000000 PLA+ Sunlu Black Transmission Distance: 0.6
#0f52ba PLA+ Sunlu Blue Grey Transmission Distance: 3
#d22332 PLA+ Sunlu Red Transmission Distance: 6
#ffd500 PLA+ Sunlu Pure Yellow Transmission Distance: 5
#ffffff PLA+ Sunlu White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue Grey
At layer #11 (0.96mm) swap to Red
At layer #15 (1.28mm) swap to Pure Yellow
At layer #20 (1.68mm) swap to White for the rest.
Tags
License
Documentation
TXT
Chapter_3_describe.txt
801B

