2026-01-23 08:27:10
2.6k
265
Support Test – Clean Top Interface
@PRINTINBAD_2287931
Donate
Message
Follow
Recommended printing method
Add
support test
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 19m
16
Share
Description
This model is a support interface test designed to evaluate the quality of the top support interface and the ease of support removal.
The test focuses on two key parameters:
- Top Z distance
- Top interface pattern spacing
When correctly tuned, the printed part detaches cleanly from the supports, while the support structure remains firmly attached to the build plate, leaving a smooth contact surface with minimal or no post-processing required.
The model is intentionally small and fast to print, allowing quick iteration and comparison of different support interface settings (approx. 10 minutes print time, depending on slicer and printer).
Recommended for testing support behavior with PLA and PETG and for fine-tuning slicer support settings before printing larger or more complex models.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
