The Lord of the Rings Inspired Clock

LUDWINGCREATION

🎨 HUEFORGE INFO🎨

🎯 Ready-to-print 3MF included

All settings are already configured. Just slice and print.

🌈 FILAMENT COLORS USED

#000000 PLA Anycubic Black Transmission Distance: 0.1

#003594 PLA Anycubic Blue Transmission Distance: 2.6

#ffffff PLA Anycubic White Warm Transmission Distance: 6.2

#e1ac8c PLA Esun Beige Transmission Distance: 4.3

This print uses 4 unique filaments

🔄 COLOR SWAP LAYERS

Start with Black

At layer #13 (1.12mm) swap to Blue

At layer #18 (1.52mm) swap to White Warm

At layer #22 (1.84mm) swap to Beige

At layer #25 (2.08mm) swap to White Warm for the rest.

⚠️ IMPORTANT⚠️

• You can resize X/Y freely

• ❗ DO NOT change Z height

👉 If you scale the model, restore the original Z height

otherwise color transitions will be incorrect.

🕐 CLOCK MECHANISM

This clock was designed with a 10 mm central hole to fit the clock movement linked below.

Clock Movement on Amazon

• If you resize the model, make sure the central hole remains at least 8 mm in diameter.

• A hole smaller than 8 mm may not be compatible with the clock movement.

• For the best fit, keeping the original 10 mm hole diameter is recommended.