0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-05-26 16:59:00
685
11
Report

Thorens turntable / gramophone cover

@Letek93_5837995
Message
Follow
Recommended printing method
Description

Elements for DIY gramophone cover.

My gramophone missed the cover so decided to create something simple myself.

It is designed for 2mm thick plexi or polycarbonate screen pieces. Cut the sheets to your needs and slide them into the corner joints. Then drill the holes through the plexi and screw everything together. Put the top cover and attach it with top caps the same way.

For Thorens TD 165 I used following sheet dimensions:

Top - 460mm x 370mm

Sides - 100mm x 340mm

Front - 100mm x 430mm

Rear - 80mm x 430mm


For whole assembly You will need 4 corners, 4x top cap and some wood screws.


For your application the hinge points on rear corner elements might need to be moved.

Files attached are in .STP format for easier remixing.

Enjoy

Tags
thorens
gramophone
turntable
turn
table
cover
lid
License