2026-05-30 18:44:10
2.7k
232
Top Riser for anycubic S1 MAX
@luchos3dprintin_1704196
Donate
Message
Follow
Recommended printing method
Add
base S1 Max riser PLA
Kobra S1 Max
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Plus
/ Plates:1
/ 8h35m
33
Share
Description
I design a simple top Riser for my anycubic S1 MAX to be able to leave the top open to help cooling. This model is just the base without the top To sit the ACE unit. I leave the TOP foir the ace in a Separate post.
This riser fit perfect in the part where the top glass originally sit and it have some extrudes in the sides so you can slide in the glass to leave a gap in between allowing air to go inside the printer and help cooling down. The print profile that I upload have the top devided in 4 pieces in one plate so you can print it all at once.
The front and back have some small hinge to add 4x 2M screws to hold the pieces together but I also used glue in the conections to help secure it. So I recommend the GLU, should be enough.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
