Description
TrackTwin – Foil T-Nut Holder & Spacer (165mm)
💡 Concept: Say goodbye to lost T-nuts inside your hydrofoil track boxes! The TrackTwin system connects both T-nuts at a fixed 165mm spacing, keeping them perfectly aligned and making foil mounting on your board faster, cleaner, and effortless. It prevents nuts from sliding around or flipping over inside US-box tracks while acting as a precise spacer guide for consistent foil positioning every session.
✨ Key Features:
- Perfect 165mm Spacing: Holds two track nuts at exact distances for quick M8 / M6 foil mast plate alignment.
- Fits Standard T-Nuts: Designed to hold brass or stainless steel track nuts with a width of approximately 18.5mm.
- Ultra Lightweight: Weighs only 7.14 grams each —zero noticeable extra weight on your setup.
- Super Fast Print: Takes less than 3 minutes each to print!
🎯 Recommended Use:
- Hydrofoil board setup (Wingfoiling, Windfoiling, Kitefoiling, SUP Foil, Surf Foil).
- Keeps T-nuts connected together in US-box track channels so they stay in place when removing or installing the foil baseplate.
- I use it for my GONG wing foil setup and my Indiana wing foil boards.
📝 Notes and Tips:
- Material Recommendation: Since this accessory will be exposed to outdoor conditions, UV radiation, and water pressure, PETG-CF (Carbon Fiber Reinforced PETG) is highly recommended for maximum stiffness, durability, and a clean matte finish. Standard PETG or ASA also works well.
- (Avoid PLA for long-term outdoor water exposure).
- Print Settings: Use 100% infill or 4+ wall perimeters for maximum structural strength along the thin flexible bridge.
- For older 3D printers please use a border (print adhesion).
- This model is designed for decorative use – not a toy
- Please remove the supports carefully.
- Use dry filament and a clean print bed; it's best to clean the print bed with Isopropanol
- I use also the cool plate
- Print multiple copies at once to reduce waste.
🔔 Caution:
- I printed and field-tested this model myself on my Kobra X printer without any issues. Minor adjustments to scale (1–2%) may be needed depending on your specific T-nut dimensions and filament shrinkage.
🌀 Used Filaments:
- OVERTURE PETG - Digital blue
- ERYONE PETG- CF - black
Of course, I'll be releasing more models soon!
I'd be very happy if you'd follow me.![]()
I would also be very happy about a comment or a “thumbs up”!![]()
Of course, I would also be very grateful for a small donation for my work.![]()
Tags
License
