0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-10-24 00:03:22
160
4
Report

Treat Keeper

@Homee_3438368
Message
Follow
Recommended printing method
Description

Treat Keeper — A sweet home for Halloween treats.

A cheerful jack-o'-lantern candy bowl with deep pumpkin ribs, a wide smiling mouth and a chunky curved green stem. Fill it with wrapped candies and chocolates for your entryway, Halloween party table or autumn display.

TWO SEPARATE PRINTS

Print the orange pumpkin body and green stem separately, then press the keyed stem into its matching socket. No multicolour printer is needed. The top stays closed; the large mouth provides easy access to the treats.

DESIGNED TO HOLD YOUR TREATS

A broad, flat base provides a stable footprint. The raised lower mouth edge forms a retaining lip, while the lightweight shell keeps material use lower than the original thick-wall SIZE

approximately 178 mm wide × 153 mm deep × 167 mm tall when assembled. Sized for a 180 mm build plate.

Use the body and stem from the same profile so the push-fit connection stays matched. The small profile uses the A1 mini printer preset and has been sliced on both plates within the 180 × 180 mm build area.

PRINTING & ASSEMBLY

1. Print the two parts in your chosen colours.

2. Remove the supports from the mouth, eyes and other supported areas, and clean any burrs from the stem connector.

3. Align the flat side of the keyed peg with the socket and press the stem into place. Gently adjust the fit if required; tolerances vary with filament and calibration.

4. Fill the bowl with wrapped treats and enjoy!

The gallery includes real photographs of the finished print and the supported body before clean-up. The illustrated Halloween covers are styled mockups; sweets and decorative props are not included. Intended for wrapped candies and chocolates.

Tags
pumpkin
halloween
holder
keeper
treat
candy
organizer
bowl
lantern
holiday
autumn
stagional
tealight
candle
support
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.