0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2024-12-08 16:51:26
3.3k
366
Report

Trichter XXL - Einfülltrichter XXL - Filling funnel XXL

@CheetahLab_4546597
Message
Follow
Recommended printing method
Description

Trichter XXL - Einfülltrichter XXL


Den Trichter habe ich eigentlich für meine Frau konstruiert, da es immer Probleme beim Einfüllen mit der Trichteröffnung gab - die Einfüllöffnung ist meistens viel zu klein und erforderte das umständige Umfüllen in andere Gefäße wie z.B. gemahlene Nüsse aus dem Thermomix ;-). Inzwischen nutze ich einen weiteren Trichter auch für das Einfüllen von Silikat, wenn es aus dem Trockner kommt.


Die Trichteröffnung hat einen Durchmesser von ca. 19cm und der Einfüllstutzen 5cm - damit lassen sich auch kleine und größere Verschlussgläser befüllen.


Viel Spaß beim Drucken und falls Du ein Like, Kommentar oder sogar ein Make da lassen würdest, würde mich das sehr freuen... ;-)



Druckeinstellungen

  • 0.2mm Layerhöhe
  • 3 Wände
  • Z-Naht: Ausgerichtet
  • PLA sollte ausreichen
  • Infill nicht nötig, da 3 Wände
  • Kein Support nötig
  • Wer sicher gehen möchte, sollte Brim aktivieren (bei Haftungsproblemen)



Filling funnel XXL


I actually designed the funnel for my wife, as there were always problems with the funnel opening when filling - the filling opening is usually much too small and required the cumbersome decanting into other containers, such as ground nuts from the Thermomix ;-). I now also use another funnel for filling silicate when it comes out of the dryer.


The funnel opening has a diameter of approx. 19 cm and the filler neck 5 cm - so you can also fill small and larger jars.


Have fun printing and if you would leave a like, comment or even a make, I would be very happy... ;-)



Print settings

  • 0.2mm layer height
  • 3 walls
  • Z-seam: Aligned
  • PLA should be sufficient
  • infill not necessary, as 3 walls
  • No support necessary
  • If you want to be on the safe side, you should activate Brim (in case of adhesion problems)



Tags
Funnel
Trichter
Einfülltrichter
XXL
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.