Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150.67x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.3mm and the Actual Depth is 2.3mm
Filaments Used:
PLA Jayo Black Transmission Distance: 0.3
PLA Jayo Gray Transmission Distance: 2
PLA Kingroon Silver Transmission Distance: 0.5
PLA Smartmaterials White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #12 (1.04mm) swap to Silver
At layer #23 (1.92mm) swap to White for the rest.
Tags
License

