VW Corrado G60 logo front grill
18.may 2019 confirmed, eventually use PETG version, but personally I prefer ABS version
Still in development. Not for commercial use.
Howdo: insert the upper part of the logo into the bottom and click the rods, use glue or hot iron. If you need to use the drill bit or rasper to increase the holes in the bottom part (by hand, not electricity).
Logo G60 front grill for VW Corrado (1989-90 model i think). I make one for my friend. The original batch was used as a pattern for this
Printed from several materials, testing Creality PLA white / Gembird ABS black / Plasty Mladec PETG black. I recommend printing ABS (I also tested PETG, but ABS is clearly for this better). Support for lower (bottom) part (ur choice). Bottom version 02 has more support in brackets.
ABS prints on my Ender 3, without enclosure, i used Gembird ABS black, no smell, occasionally WARP (room temperature and around the printer, i suppose, who know, newbie in 3d print).
Print instructions
Unassociated tags: front batch
Category: Other Summary
18.may 2019 confirmed, eventually use PETG version, but personally I prefer ABS version
Still in development. Not for commercial use.
Howdo: insert the upper part of the logo into the bottom and click the rods, use glue or hot iron. If you need to use the drill bit or rasper to increase the holes in the bottom part (by hand, not electricity).
Logo G60 front grill for VW Corrado (1989-90 model i think). I make one for my friend. The original batch was used as a pattern for this
Printed from several materials, testing Creality PLA white / Gembird ABS black / Plasty Mladec PETG black. I recommend printing ABS (I also tested PETG, but ABS is clearly for this better). Support for lower (bottom) part (ur choice). Bottom version 02 has more support in brackets.
ABS prints on my Ender 3, without enclosure, i used Gembird ABS black, no smell, occasionally WARP (room temperature and around the printer, i suppose, who know, newbie in 3d print).
Print Settings
Printer Brand: Creality
Printer: Ender 3
Rafts: No
Supports: Yes
Resolution: 0.2
Infill: 15%
Filament: Gembird ABS Black Notes:
Printed from several materials, on the photos of Creality PLA white and Gembird ABS black. I recommend printing ABS (I also tested PETG, but ABS is clearly for this better).
How I Designed This
how did I create it?
I used photos, caliper, original batch G60. Fusion 360, patience, several test prints for coloring and for different plastic properties - for testing.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
