Vesta - Pendant Lamp

Vesta is a pendant lamp with a flared, modern profile that works well over a dining table or in a living room corner.

Assembly starts from a central toothed disc that holds 31 identical slats: you slot them in one after another until the crown is complete, and the final shape comes from the repetition itself. No glue, no screws. The slats need a 350mm build plate, so a Anycubic Kobra S1 Max printer.

To finish it you need an E27 lamp holder with pendant cord, a ring nut to lock it into the central hole of the disc, and an LED bulb.

Suggested settings: 0.4 mm nozzle, 0.2 mm layers, 8-10% infill or higher.