2025-09-23 15:27:53
2.7k
278
Voron Cube Test - Kobra S1
@Flavia_1779827
Donate
Message
Follow
Recommended printing method
Add
Voron Cube Kobra S1
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 34m
30
Share
Description
This 30 mm test cube is designed for calibrating and fine-tuning the Anycubic Kobra S1 Combo. It helps you quickly verify the accuracy of your printer after setup, upgrades, or adjustments.
What you can test:
- Dimensional accuracy (X/Y/Z = 30 mm target)
- Flow calibration (under-/over-extrusion)
- Layer consistency and alignment
- Vibrations, ringing/ghosting on sharp edges
Tips:
- Print with your standard profile (no scaling).
- Measure all three axes with calipers and compare to 30 mm.
- Use results to fine-tune e-steps, flow, or belt tension.
A simple, reliable way to keep your Cobra S1 Combo perfectly dialed in.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
