2024-09-17 17:28:12
8.4k
831
Watering can
@cherrymanboy_2659444
Donate
Message
Follow
Recommended printing method
Add
Kobra S1
Kobra S1
/ Plates:1
/ 0m
254
Share
Description
I have permission from the original designer to use the design. The original files are available at the link https://makerworld.com/en/models/398578#profileId-300091 .
New watering can design this one is larger than the last will hold over 1 litre of water. This one also includes a spout which can also be stored in the handle area where not in use. The spout is a Friction fit it seems to hold very well but as this is only friction fit it should be checked and caution when using all. It prints all on one bed in one print which will take approximately 10 hours printing time with a 0.16mm layer height which helps keep it water tight and three wall layers.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
