2026-09-09 20:14:16
372
56
Windmill Anemometer Wind Direction Indicator
@Boleq98_3827329
Donate
Message
Follow
Recommended printing method
Add
Wind Indicator
Kobra X
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Pro
、
Kobra 2 Max
、
Kobra 3 Max
、
Kobra 3 V2
/ Plates:2
/ 2h45m
17
Share
Description
Wind indicator, without additional bearings.
Printed from PLA.
After printing the bearings gently hold and move them, then add some oil.
The blades for the windmill should be printed with supports.
Bearings should be printed at a height of 0.18. The other parts can have higher values.
Some parts fit together very tightly and you need to use a lot of force. Be careful not to break the pieces.
At the bottom there are holes for screws, you can attach it anywhere or use zip ties to secure it.
Remember that printed bearings do not work as efficiently as metal ones. Depending on the printer or material, they may work in different ways.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
