Wooden 5th Wheel Flatbed Trailer
Trailer made out of all wood pla filament, maple & walnut. Tried to make it look like wood grain. Has fold up and down jacks in the front and fold up and down ramps in the back. Hold down straps to keep the loads steady while traveling. Made for kids to play with has pin in fifth wheel to go with Wood Toy Dually Truck i made.
Sand all the pins the wood pla prints larger than made & real brittle break easy. Sand the axles to let the wheels turn freely. Enjoy
🧩 No AMS needed – prints in separate plates for easy color swapping!
Use a piece of filament to hold the back ramps i didn't use glue so if it breaks can be replaced easy
The jacks in the front can lower to hold up when not connected to the truck & fold up after hooked up
Made hold down straps to hold loads while moving just cut 2 rubber bands and tie to the hooks
Boost Me If you like what you see, consider giving me a boost! they help out a lot. Don’t forget to like and follow for more 3D prints Thanks
Check out my other models https://www.makeronline.com/en/user/uploads/models/all.html
For the Truck model https://www.makeronline.com/en/model/Wood%20Dually%20Truck/249423.html?trackModuleType=10
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
