0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-12-21 04:58:37
1.8k
74
Report

ZELDA HUE FORGE

@bizz_2786874
Message
Follow
Recommended printing method
Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm


 The Model is 112.5x200mm in size

 You may print at higher layer heights below the Base Thickness of 0.24mm

 The Max allowed Thickness is 2mm and the Actual Thickness is 1.51979mm


Filaments Used:

#000000 PLA BambuLab Basic Black Transmission Distance: 0.6

#c00d1e PLA BambuLab Basic Red Transmission Distance: 4

#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5

#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4

This print uses 4 unique filaments


Swap Instructions:

Start with Black

At layer #4 (0.4mm) swap to Red

At layer #5 (0.48mm) swap to Pumpkin Orange

At layer #15 (1.28mm) swap to Sunflower Yellow for the rest.

Tags
HUEFORGE
HUE FORGE
ZELDA
NINTENDO
SWITCH
ART
VIDEOGAMES
QUADRO
License