Zangief Street Fighter 2 Pixel Art Figure
ZANGIEF: ULTIMATE EDITION (Street Fighter II)
Thanks to all the support received and the positive comments, I have decided to continue the collection, and what better way to do it than with the legendary Zangief!!
Here is the fifth model of my new Street Fighter collection: ZANGIEF. This series, titled “Ultimate Edition”, is designed with multi-layer depth, textured clothing, and separate parts to achieve the finish and relief of a real collector's figure. To optimize printing, the design ensures that color changes only occur within the first 3 layers, saving you significant time and minimizing filament purge.
KEY FEATURES
- 3 Poses Included: Initial Stance, Victory, and Kick.
- 2.5D Assembly: Clothes and details are designed to be glued onto the bodies, creating a relief.
- Customizable Base: Organize the characters however you like on the base, featuring an engraved Street Fighter II logo.
- Noir Background: Background image based on the original game selection screen (Black, Silver, Dark Grey, and White).
PRINT PROFILES
- OPTION A: (1 ACE PRO2 / 4 Colors) Bodies and clothes are on separate plates for the best surface finish. Assembly: You need to GLUE the clothes onto the bodies. I recommend using Gel Superglue (Cyanoacrylate) for total control.
- OPTION B: (2 ACE PRO2 / 8 Colors) Zangief is printed as a single piece (Body + Clothes combined).
TOLERANCE TEST (Important Read) The last plate contains a fit test. Print this first to verify your printer's accuracy.
- The Design: All slots have a 0.25 mm offset relative to the tabs.
- How to read it: If the token fits perfectly in the second slot, your settings are ideal (0 adjustment).
- Adjustments: If it doesn't fit or is too loose, adjust the "X-Y Hole Compensation" setting on the 02-MAIN BASE plate.
- +0.05: Makes holes larger.
- -0.05: Makes holes smaller.
- Tip: If the fit becomes loose after frequent use, a small piece of cardstock behind the tab will fix it perfectly.
RECOMMENDED SETTINGS
- Layer Height: 0.2 mm
- Orientation: Print models face-down to ensure the correct color sequence and the best possible surface quality.
- Line Width (1st Layer): 0.5 mm
- Bottom Layers: 3
- Infill: 15%
- Top Surface: Monotonic Line.
- Wall Generator: Arachne (Recommended for pixel details).
- Filaments Used: I used the Smartfill Recycled range from Smart Materials, except for the skin tones (Skin and Tan Skin) from the same brand. The final finish may vary slightly depending on your filament brand due to the gradient techniques used in the model.
COMPLETE YOUR SCENE This figure is designed to fit perfectly into the two published dioramas. Choose your favorite stage to display Zangief!
Guile Stage: Air Force Base (SFII)
Ryu Stage : Suzaku Castle (SFII)
Full Set - Ultimate Collection: (Still in progress. I'm adding new characters to the collection.)
🧵 Want to go the extra mile?
You can help me create new designs by joining my team! Support my work here:
