Zephyrus Lampshade

Zephyrus Lampshade is a lampshade designed for LED bulbs with an E14 socket, featuring a modern design and the possibility of being split into multiple parts directly in the slicer, allowing you to create unique, customized color combinations.

Its compact shape has been designed to be printed with the narrower part facing the print bed, without requiring supports. For increased stability, it is recommended to enable an external brim only.

Below are the suggested print settings:

• Divide into parts in the slicer to vary colors
• Nozzle: 0.4 mm
• Layer height: 0.2 mm
• Seam alignment
• Infill density: 10%
• 3 bottom layers and 5 top layers
• Brim: external only

Assembly instructions

1. Pass the power cable through the threaded pin (standard M10x1, 8 mm) at the top of the lampshade.
2. Install the threaded E14 lamp holder onto the cable and screw it onto the pin.
3. No additional rings or washers are required for fastening: the lamp holder itself will lock the lampshade in place.