Anycubic Kobra S1 Nozzle wiper couple
Anycubic Kobra S1 replace stock nozzle wiper with double silicone wiper pad size 14x6x6mm
The silicone pad will improve nozzle wipe perfomance than the stock wiper.
Silicone wiper pad 14x6x6 (for P1S/X1)
https://www.aliexpress.com/item/1005009120354621.html
(The link is for reference, you can buy from any shop with a good reviews or find it on amazon)
High temp resistant filament PETG, ABS is recommended
Can printed without supported / Standard 0.4 nozzle / 0.16 layer high
Note:
V1.4 Silicone socket size 13.8x5.8 Depth 2.9 mm
*Due to actual silicone size is a bit smaller than spec 14x6 then I make socket a bit smaller to fit actual silicone size
Checkout single pad version here (old): https://makeronline.com/en/model/Anycubic%20Kobra%20S1%20Nozzle%20wiper/188530.html
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
