daenerys volando dragon

Project: daenerys volando.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x200mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.6mm and the Actual Depth is 2.7mm

Filaments Used:

PLA Overture Chocolate Transmission Distance: 0.2

PLA BambuLab Basic Beige Transmission Distance: 8

PLA Default White Transmission Distance: 5

This print uses 3 unique filaments

Swap Instructions:

Start with Chocolate

At layer #18 (1.52mm) swap to Beige

At layer #28 (2.32mm) swap to White for the rest.