donald duck hueforge

Project: pato donalt.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 271x485.53mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3

PLA BambuLab Basic Green Transmission Distance: 2

PLA BambuLab Basic Blue Transmission Distance: 4

PLA BambuLab Basic Blue Gray Transmission Distance: 3

PLA BambuLab Basic Orange Transmission Distance: 7

PLA BambuLab Basic Yellow Transmission Distance: 6

PLA BambuLab Matte Ice Blue Transmission Distance: 3.5

PLA PolyLite White Transmission Distance: 5

This print uses 8 unique filaments

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Green

At layer #10 (0.88mm) swap to Blue

At layer #12 (1.04mm) swap to Blue Gray

At layer #13 (1.12mm) swap to Orange

At layer #17 (1.44mm) swap to Yellow

At layer #20 (1.68mm) swap to Ice Blue

Border Only Colors from here until the end.

At layer #23 (1.92mm) swap to White for the rest.