2025-03-26 16:46:28
2.1k
164
flow calbration
@Mario_4589030
Donate
Message
Follow
Recommended printing method
Add
flow tests
Kobra S1
Kobra S1 Max
、
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:4
/ 1h 26m 08s
13
Share
Description
simple yet effective flow calibration. walls should measure 2mm
Rough flow 1.1 to 0.85 flow highest to lowest left to right
pick the one that measures just under 2mm walls on average
Fine flow 1.05 to 1 flow now pick the one that's closest on average to 2mm
after that your can take it farther and do the same for your top layer.
original flow value is 0.96
License
