2024-12-24 21:06:44
261
7
franchino hueforge
@andy_3964068
Donate
Message
Follow
Recommended printing method
Add
hueforge setting
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 2h38m
1
Share
Description
Franchino vocalist dj italiano hueforge fatto da me
Project: test 1.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 153.48x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #14 (1.2mm) swap to White for the rest.
Tags
License
