imagen kirito y asuna

Project: kiritoasunabyn.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x200mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.6mm and the Actual Depth is 2.7mm

Filaments Used:

PLA Smart Recycled Black Transmission Distance: 0.5

PLA Overture Cement Gray Transmission Distance: 0.6

PLA Smart Recycled Silver/Gray Transmission Distance: 0.5

PLA Smart Recycled White Transmission Distance: 5.7

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Cement Gray

At layer #12 (1.04mm) swap to Silver/Gray

At layer #23 (1.92mm) swap to White for the rest.